Excavation plan
3. Preparation of the pool subsoil
The excavation bottom is filled with a subsoil layer of washed round gravel, poured on a geotextile and rammed. It´s also possible to prepare a concrete base plate, but Compass ceramic pool installation doesn´t require it, gravel bed settles the pool sufficiently.
4. Pool transportation and placing
The next step is to transport the pool and place it on the base plate or gravel bed.
5. Technology installation and backfilling
Once the skimmer, inlet nozzles, lights, hoses and pipes are fitted, the pool is gradually backfilled around by dry concrete mixture or gravel. At the same time pool is filled by water to balance the pressure exerted on the walls.
The space under the stairs is always filled with dry concrete.
FIG. Ceramic pool installation and backfilling by dry concrete mixture
FIG.
6. Technology installation in the shaft
Once the pool is settled, the pool technology installation begins – either in the pool shaft or in a room designated for this purpose (garage, basement, garden shed).
7. Pool roofing
Roofing rails are settled onto the concrete pool ring (if they are going to be imbedded at the paving level), or are settled after the tiles are layed.
8. Tiling around the pool
9. Roofing installation
10. It´s done…
… let´s go swimming.
See how the pool is moved from the street to the construction site.
No comments:
Post a Comment